This page was exported from Easily Pass By Training Lead2pass Latest Dumps
[
https://www.freebraindump.com
]
Export date: Fri Mar 29 7:31:47 2024 / +0000 GMT
2016 November Cisco Official New Released 642-999 Dumps in Lead2pass.com! 100% Free Download! 100% Pass Guaranteed! 642-999 dumps free share: Lead2pass presents the highest quality of 642-999 exam dump which helps candidates to pass the 642-999 exams in the first attempt. Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/642-999.html QUESTION 121 A. any configuration Answer: C QUESTION 122 A. The MAC Register Mode in the network control policy is set to Only Native VLAN. Answer: C QUESTION 123 A. It can have any VLAN allowed on it. Answer: D QUESTION 124 A. extension key Answer: AD QUESTION 125 A. The VM last passed traffic more than 5 minutes ago. Answer: CF QUESTION 126 A. None is software assisted, and high-performance is software and hardware assisted. Answer: A QUESTION 127 A. SR-IOV is not enabled for the virtual switch inside Hyper-V. Answer: A QUESTION 128 A. Adapter FEX extends the fabric into the server. Answer: A QUESTION 129 A. VXLAN Answer: B QUESTION 130 A. vCenter on the port group Answer: B QUESTION 131 A. Binding is set to ephemeral on the DVS, but it must be set to static. Answer: B QUESTION 132 A. Each VSAN requires a dedicated VLAN to carry FCoE traffic. Answer: A QUESTION 133 A. Configure management interfaces on the fabric interconnect. Answer: BDF QUESTION 134 A. CPU pinning Answer: BC QUESTION 135 A. read-only Answer: B QUESTION 136 Refer to the Exhibit 2 screenshot of the NX-OS shell CLI in UCS Manager. What LAN policy correlates with the line "pinning server pinning-failure link-down"? A. Dynamic vNIC Connection Answer: D QUESTION 137 Which log would you view to determine which UCS Manager user modified a Service Profile? A. Events Answer: D QUESTION 138 Refer to the Exhibit 3 screenshot of UCS Manager. Which two items are required to configure an IPMI profile? (Choose two.) A. IPMI Type Answer: BC QUESTION 139 Refer to the Exhibit 4 screenshot of the UCS Manager. Which item can only be configured in the Storage Cloud? A. iQN Pools Answer: D QUESTION 140 Refer to the screenshot in Exhibit 2. Which item is true about Boot Order in Cisco UCS -Series Rack Servers? A. Boot order configured in the BIOS will not be reflected in the Cisco IMC GUI. Answer: A Lead2pass is now offering Lead2pass 642-999 PDF dumps with 100% passing guarantee. Use Lead2pass 642-999 PDF and pass your exam easily. Download Cisco 642-999 exam dumps and prepare for exam. 642-999 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDRVhLQi1RbU5WdmM 2016 Cisco 642-999 exam dumps (All 175 Q&As) from Lead2pass: http://www.lead2pass.com/642-999.html [100% Exam Pass Guaranteed]
Which boot option must be present in the boot policy to have the option to manually boot from the FlexFlash Secure Digital card?
B. FlexFlash state
C. local disk
D. remote virtual drive
An admin wants to make sure that for each VLAN added to a vNIC, a static MAC address entry is added to the fabric interconnect. Which setting within Cisco UCS Manager accomplishes this task?
B. The MAC Register Mode in the LAN connectivity policy is set to All Host VLANs.
C. The MAC Register Mode in the network control policy is set to All Host VLANs.
D. The MAC Register Mode in the LAN connectivity policy is set to Only Native VLAN.
E. The MAC Register Mode in the link protocol policy is set to All Host VLANs.
F. The MAC Register Mode in the link protocol policy is set to Only Native VLAN.
Which statement about an iSCSI vNIC when it is created with an overlay NIC is true?
B. It can be assigned a unique MAC address.
C. It can have a unique pin group assigned to it.
D. It can have only the overlays native VLAN associated to it.
While configuring communication between vCenter and Cisco UCS, which two items are contained in the extension file? (Choose two.)
B. plug-in version information
C. SSL private certificate
D. Cisco UCS Manager SSL public certificate
E. SSH public key
F. Cisco UCS Manager admin credentials
G. IP address of the hosts utilizing VM link
H. vCenter SSL public certificate
Cisco UCS Manager has deleted the VM object from its database, yet it still exists in vCenter. For which two reasons is the object removed from the Cisco UCS Manager database? (Choose two.)
B. The VM is misconfigured.
C. The VM has been offline for more than 15 minutes.
D. vCenter is offline.
E. The VN link policy has been set for auto-deletion during a vMotion event.
F. The link between the fabric interconnect and IOM is offline.
G. The object was deleted in the Cisco UCS Manager, which also deletes it from vCenter.
H. The VM traffic is being sent to a SPAN
Which option describes the difference between "high-performance" and "none" on a VM-FEX port profile?
B. None indicates that VM-FEX is not used on this interface, and high-performance indicates that is used.
C. None is used for management profiles, and high-performance is used for mission-critical data profiles.
D. None assumes default scheduling settings for the port profile, and high-performance gives the ports priority in scheduling.
While configuring VM-FEX for Hyper-V, the virtual switch does not show up when you add the host with the port-profile management snap-in. Which statement describes the most likely cause?
B. Cisco Nexus 1000v is not enabled for the virtual switch.
C. Hyper-V requires Cisco UCS Manager to utilize Cisco Discovery Protocol on the vNIC profile.
D. An active VM is not associated with the port profile.
E. VM-FEX does not work with Hyper-V.
F. VM-FEX has been configured on the Catalyst switch but not in System Center yet.
Which statement about Adapter FEX is true?
B. Adapter FEX extends the fabric into the hypervisor.
C. Adapter FEX extends the fabric down to the FEX port.
D. Adapter FEX extends the fabric down to the VM.
Which technology makes VM-FEX possible?
B. VNTAG
C. VPC
D. DVS
Where do you configure the VLAN when provisioning new VLANs in VM-FEX?
B. Cisco UCS Manager on the port profile
C. Cisco UCS Manager on the service profile
D. vCenter on the host
When using VM-FEX, the new VMs are not connected, but existing VMs are unaffected. Which option describes the most likely cause?
B. Dynamic NICs have been exhausted.
C. Hostd on the host has stopped responding to Cisco UCS Manager.
D. The adapter has failed.
Which of the following is true concerning Fibre Channel communications on a Cisco Unified Computing System?
B. FCoE VLANs are created like Ethernet VLANs on Cisco Unified Computing System Manager.
C. FCoE VLANs may overlap with Ethernet VLANs.
D. Cisco Unified Computing System Manager supports a maximum of 128 active VSANs.
Which three tasks can a user with the ext-lan-policy privileges perform? (Choose three.)
B. Configure Ethernet pin groups.
C. Configure management interfaces monitoring policy.
D. Create/modify/delete vNIC/vHBA placement policies.
E. Configure DNS providers and DNS domain.
F. Specify the allowed range for virtual MAC addresses.
G. Configure fabric interconnect system name.
H. This privilege has full access to all operations.
Which two settings are required when utilizing DirectPath I/O? (Choose two.)
B. full memory reservation
C. Set port profile performance to "high".
D. vCPU pinning
E. VM queue modification
F. adapter profile update
G. Install DirectPath VIB on host.
H. Enable VMQ with the "enable-netadaptervmq" cmdlet.
When configuring roles in the Cisco UCS C-Series, which role should be assigned for a person who must be allowed to power on the server and install a hypervisor using virtual media, but not allowed to configure other Cisco Integrated Management Controller settings?
B. user
C. VM admin
D. admin
Scenario
In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager.
Instructions
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task.
Be sure to answer all four questions before selecting the Next button.
B. Link Protocol
C. Flow Control
D. Network Control
Explanation:
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-5100-series-blade-server-chassis/116075-ucs-app-connectivity-tshoot-00.html
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_chapter_010101.html#concept_80DD753607A0427A9874F278E172F2FA
Scenario
In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager.
Instructions
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task.
Be sure to answer all four questions before selecting the Next button.
B. Audit
C. Syslog
D. SEL
Explanation:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01 01101.html
Scenario
In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager.
Instructions
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task.
Be sure to answer all four questions before selecting the Next button.
B. User
C. Role
D. Locale
E. Administrative State
Explanation:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01 1100.html#d129007e3491a1635
Scenario
In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager.
Instructions
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task.
Be sure to answer all four questions before selecting the Next button.
B. Storage FC Clinks
C. Port Channels
D. VSANs
E. Zoning
Explanation:
http://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs- infrastructure-ucs-manager-software/116082-config-ucs-das-00.html
Scenario
In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager.
Instructions
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task.
Be sure to answer all four questions before selecting the Next button.
B. Boot options should not be disabled in the BIOS.
C. The Boot Order set in the BIOS does not override the Cisco IMC.
D. Boot Order should only be configured in the Cisco IMC GUI.
Post date: 2016-11-18 07:13:50
Post date GMT: 2016-11-18 07:13:50
Post modified date: 2016-11-18 07:13:50
Post modified date GMT: 2016-11-18 07:13:50
Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team www.gVectors.com