This page was exported from Easily Pass By Training Lead2pass Latest Dumps [ https://www.freebraindump.com ] Export date:Thu Mar 28 11:01:20 2024 / +0000 GMT ___________________________________________________ Title: Latest Update Free Version of Microsoft 70-342 Exam Dumps in Lead2pass (51-60) --------------------------------------------------- Lead2pass 70-342 practice tests hold the key importance and provide a considerable gain for your knowledge base. You can rely on our products with unwavering confidence; Get the profound knowledge and become a pro with Lead2pass assistance. QUESTION 51Drag and Drop QuestionYou have an Exchange Server 2013 database availability group (DAG). Each member of the DAG has two network interfaces named Network1 and Network2. Network1 is used for client connections. Network2 is used for database replication.Network2 fails.You discover that replication traffic is sent over Network1.You need to ensure that all of the database replication traffic is sent over Network2. The solution must minimize database replication downtime.Which three actions should you perform? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order. Answer: QUESTION 52You have an Exchange Server 2013 organization that contains two servers. The servers are configured as shown in the following table. EX1 and EX2 are members of a database availability group (DAG) named DAG1. You have a database named DB1 that replicates to EX1 and EX2. EX1 fails. You discover that DB1 does not mount on EX2. You view the status of the mailbox databases as shown in the following table. You need to ensure that the database attempts to mount on EX2 if EX1 fails.What should you change? A.    The AutoDatabaseMountDial setting to LosslessB.    The AutoDatabaseMountDial setting to BestAvailabiltyC.    The activation preference of DB1EX2D.    The activation preference of DB1EX1 Answer: BExplanation: * The MailboxServer.AutoDatabaseMountDial property gets or sets the automatic database mount behavior for an Exchange server that is running the Mailbox server role in a continuous replication environment after a database failover.* The AutoDatabaseMountDial property specifies the automatic database mount behavior of a Mailbox server after a failover. Each behavior is based on the copy queue length, or the number of logs that are recognized by the passive copy that need to be replicated. If the copy queue length is greater than the value specified for the behavior, the database does not automatically mount. If the copy queue length is less than or equal to the value specified for the behavior, the Mailbox server tries to copy the remaining logs to the passive copy and mounts the database.* BestAvailabilityThe database automatically mounts immediately after a failover if the queue length is less than or equal to 12.Incorrect:Not A: LosslessThe database does not automatically mount until all logs generated on the active device are copied to the passive devicehttp://msdn.microsoft.com/en-us/library/microsoft.exchange.data.directory.management.mailboxserver.autodatabasemountdial%28v=exchg.150%29.aspx QUESTION 53Your company has a data center in New York and a data center in Miami.The company has an Exchange Server 2013 organization that contains a database availability group (DAG).The DAG contains servers in both data centers.The company plans to deploy Outlook Anywhere to all users.You configure the following:- All of the Exchange Server 2013 virtual directories in the New York data center use a host name of mail.contoso.com.- All of the Exchange Server 2013 virtual directories in the Miami data center use a host name of miami.mail.contoso.com.- In each data center, a certificate from an enterprise certification authority (CA) is configured to contain the following:- A certificate principal name of mail.contoso.com- Subject alternate names of mail.contoso.com and miami.mail.contoso.comYou need to recommend which task must be performed to meet the following requirements:- Users always must attempt to connect first to a server in the data center where their mailbox is located.- Users must be able to access their mailbox if a single data center fails.What should you recommend? A.    Change the external host name of the Miami data center to mail.contoso.com.B.    Modify the ExternalUrl of the Autodiscover virtual directory of the Client Access servers.C.    Run the Set-OutlookProvider cmdlet.D.    Run the Add-AvailabilityAddressSpace cmdlet. Answer: BExplanation: http://technet.microsoft.com/en-us/library/bb123683%28v=exchg.150%29.aspxUse the Set-OutlookProvider cmdlet to set specific global settings using the msExchOutlookProvider attribute on the msExchAutoDiscoverConfig object in Active Directory.A - wrong because that would only confuse the DNS resolution and not allow clients to connect to their siteB - Correct this is the only answer that specifies an external URL specific to each siteC - wrong because the Set-OutlookProvider cmdlet is Organization wide and not site-specificD - wrong because this deals with free/busy information and not Outlook Anywhere connectivity QUESTION 54Your company has offices in Tokyo, Bangkok, and Shanghai.All connections to the Internet are routed through an Internet connection in the Tokyo office. All of the offices connect to each other by using a WAN link.The network contains 10 servers that have Exchange Server 2010 installed. The servers are configured as shown in the following table. You plan to deploy 10 servers that will have Exchange Server 2013 installed. The servers will be configured as shown in the following table. Each site has an IP-PBX that provides telephony services for the mailboxes in that site by using unsecured SIP over TCP 5070. The IP-PBX uses the same port to connect to multiple SIP peers.You need to recommend which tasks must be performed to ensure that the Unified Messaging (UM) features are available to the mailboxes if a single server fails.Which three actions should you include in the recommendation? (Each correct answer presents part of the solution. Choose three.) A.    Configure the Exchange Server 2013 Mailbox servers to listen to unsecured SIP on TCP 5070.B.    Configure the Exchange Server 2013 Client Access servers to listen to unsecured SIP on TCP 5070.C.    Install the Client Access server role on the Exchange Server 2013 servers in the Shanghai and Bangkok offices.D.    Configure the Exchange Server 2013 Mailbox servers as additional SIP peers that contain new pilot identifiers.E.    Configure the Exchange Server 2013 Client Access servers as additional SIP peers that contain new pilot identifiers. Answer: BCE QUESTION 55You have an Exchange Server organization that contains five servers. The servers are configured as shown in the following table. You need to create a Lync Server SIP Unified Messaging (UM) dial plan to enable voice integration between Lync Server and Exchange Server.Which three Exchange servers should you associate to the UM dial plans? (Each correct answer presents part of the solution. Choose three.) A.    EX1B.    EX2C.    EX3D.    EX4E.    EX5 Answer: CDEExplanation: C: You can enable Unified Messaging (UM) in Microsoft Exchange Server 2010. You must enable the Exchange computer running the Unified Messaging server role before the Unified Messaging server can process calls for UM-enabled Exchange 2010 recipients in your Exchange organization. However, the Unified Messaging server also must be added to a UM dial plan before it can process calls for Unified Messaging.D,E:* Requirements and RecommendationsClient Access and Mailbox. In Microsoft Exchange Server 2013, Exchange UM runs as a service on these servers.* Deploy the Exchange Mailbox server roles in each Exchange Unified Messaging (UM) forest where you want to enable users for Exchange UM.http://technet.microsoft.com/en-us/library/aa996399%28v=exchg.150%29.aspx QUESTION 56Drag and Drop QuestionYou have a server that has Exchange Server 2013 installed.You plan to configure Unified Messaging (UM) to connect to an IP-PBX.A telecommunications administrator configures the following numbers on the IP-PBX:- First extension number: 12100 - Last extension number: 12499 - Help extension number: 12500 - Incoming pilot number: 12000You need to configure UM to support the following requirements:- Users must be able to use Outlook Voice Access. - Users must be able to receive voice mail when callers connect to the users' extension. - Callers must be able to dial into an automated help system hosted by your company, which uses standard menus and speech-enabled menus.Which numbers should you use for the UM configurations? To answer, drag the appropriate number to the correct UM object in the answer area. Each number may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content. Answer: QUESTION 57Drag and Drop QuestionYou are an administrator for a company named Contoso, Ltd. The company is an international reseller that has offices worldwide. One of the offices is located in France.Each office contains several servers that have Exchange Server 2013 installed. The Exchange Server organization is configured for Unified Messaging (UM). Each office contains an IP-PBX device.You need to ensure that callers to the France office can navigate the voice mail system menu in French.In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order. Answer: QUESTION 58You have an Exchange Server 2013 organization.You successfully migrate the public folders from a previous version of Exchange Server.You discover that one of the public folder mailboxes almost reached its quota size. You need to move some of the public folders in the public folder mailbox to another public folder mailbox.What should you run? A.    Split-PublicFolderMailbox.ps1B.    Set-MailPublicFolderC.    Update-PublicFolderMailboxD.    Set-PublicFolderMailbox Answer: AExplanation: You can either perform a publicfoldermoverequest, or run the splitpublicfoldermailbox.ps1 script.* Split-PublicFolderMailbox.ps1Splits the given public folder mailbox based on the size of the folders.* If the content of a public folder mailbox begins to exceed your mailbox quotas, you may need to move public folders to a different public folder mailbox. There are a couple ways to do this. To move one or more public folders that don't contain subfolders, you can use the PublicFolderMoveRequest cmdlets.Reference: Move a Public Folder to a Different Public Folder Mailbox QUESTION 59You have a hybrid deployment of Exchange Server 2013 and Microsoft Office 365. The network does not have Active Directory Federation Services (AD FS) 2.0 installed. A user named User1 reports that he cannot access his mailbox because his account is locked out. You verify that the mailbox of User2 is hosted on Office 365. You need to unlock the account of User1. Which cmdlet should you run? A.    Set-MailUserB.    Set-MSolUserC.    Set-MailboxD.    Set-ADUser Answer: BExplanation: Applies To: Office 365, Windows Azure, Windows IntuneThe Set-MsolUser cmdlet is used to update a user object.Parameters include:-BlockCredential <Boolean>When true, the user will not be able to sign in using their user ID.Incorrect:Not C: Set-MailboxUse the Set-Mailbox cmdlet to modify the settings of an existing mailbox.Applies to: Exchange Server 2013, Exchange Onlinehttp://blogs.inframon.com/post/2012/08/07/Office-365-User-Account-Lockout.aspx QUESTION 60You have a hybrid deployment of Exchange Server 2013 and Office 365. The mail flow between Office 365 and the on-premises Exchange Server environment is routed through an Exchange Server 2010 Edge Transport server.Your company is assigned a new set of public IP addresses. A network administrator updates the external firewall address and all of the associated DNS records.Office 365 users report that they cannot receive email messages from on-premises users.You discover that outgoing email messages to Office 365 are in the Office 365 SMTP queue on an Edge server.You need to ensure that the on-premises users can send email messages successfully to theOffice 365 users. Which tool should you use? A.    The Exchange Management ConsoleB.    The Exchange Control Panel in Office 365C.    The Exchange Admin CenterD.    The Exchange Remote Connectivity Analyzer Answer: C Lead2pass Microsoft 70-342 practice question and answer PDF set is developed using the latest Microsoft exam content published by Microsoft. Every Microsoft 70-342 exam question is verified and detailed descriptions are given to understand the answer fully. Microsoft's comprehensive and relevant answers along with examples help the user grasp the concepts thoroughly. http://www.lead2pass.com/70-342.html --------------------------------------------------- Images: http://www.itexamquiz.com/lead2pass/l2pimages/5a5c78c3c5f2_9AB8/wps2376.tmp_thumb_thumb.png http://www.itexamquiz.com/lead2pass/l2pimages/5a5c78c3c5f2_9AB8/wps44DC.tmp_thumb_thumb.png http://www.itexamquiz.com/lead2pass/l2pimages/5a5c78c3c5f2_9AB8/wps7D89.tmp_thumb2_thumb.png http://www.itexamquiz.com/lead2pass/l2pimages/5a5c78c3c5f2_9AB8/wpsBEAF.tmp_thumb_thumb.png http://www.itexamquiz.com/lead2pass/l2pimages/5a5c78c3c5f2_9AB8/wps2713.tmp_thumb_thumb.png http://www.itexamquiz.com/lead2pass/l2pimages/5a5c78c3c5f2_9AB8/wpsFE7E.tmp_thumb_thumb.png http://www.itexamquiz.com/lead2pass/l2pimages/5a5c78c3c5f2_9AB8/wps3A76.tmp_thumb_thumb.png http://www.itexamquiz.com/lead2pass/l2pimages/5a5c78c3c5f2_9AB8/wps7F14.tmp_thumb2_thumb.png http://www.itexamquiz.com/lead2pass/l2pimages/5a5c78c3c5f2_9AB8/wpsB236.tmp_thumb2_thumb.png http://www.itexamquiz.com/lead2pass/l2pimages/5a5c78c3c5f2_9AB8/wps7891.tmp_thumb_thumb.png http://www.itexamquiz.com/lead2pass/l2pimages/5a5c78c3c5f2_9AB8/wps9BDB.tmp_thumb_thumb.png --------------------------------------------------- --------------------------------------------------- Post date: 2015-01-04 03:11:47 Post date GMT: 2015-01-04 03:11:47 Post modified date: 2015-01-04 03:11:47 Post modified date GMT: 2015-01-04 03:11:47 ____________________________________________________________________________________________ Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com