OFFER Pass4sure and Lead2pass 010-151 PDF & VCE

Vendor: Apple
Exam Code: 010-151
Exam Name: Supporting Cisco Data Center System Devices

Which three statements about FCoE are true? (Choose three.)

A.    Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.
B.    Encapsulates Fibre Channel frames into Ethernet frames, which allows them to run alongside traditional IP traffic.
C.    Increases capital costs due to the difficulty to manage.
D.    Consolidates I/O traffic in the data center.

Answer: ABD

» Read more

Free Download Apple 9L0-410 Exam Question with PDF & VCE

Vendor: Apple
Exam Code: 9L0-410
Exam Name: Mac OS X Support Essentials 10.7

Review the four Apple System Profiler screenshots from a single Mac OS X v10.7 computer, and then answer the question below.

What version of EFI firmware is installed on the computer whose profile is shown above?

A.    MP31.006C.B05
B.    1.25f4
C.    68929F4A-E7A4-5A2C-AFA2-F9E3467E872E
D.    01.00.252
E.    BC14
F.    1.3.0

Answer: A

» Read more

Latest APC PB0-200 Exam Dumps Free Download with PDF & VCE

Vendor: APC
Exam Code: PB0-200
Exam Name: NCPI Design

What is TVSS?

A.    Transient voltage Static Switch
B.    Terminal Voltage Surge Suppression
C.    Transient voltage surge suppression
D.    Transient variable surge suppression

Answer: C

If a rack-mount PDU is accidentally overloaded, which device activates and isolates the electric power to the outlets?

A.    TVSS
B.    Transformer
C.    Circuit breaker
D.    Automatic Transfer Switch

Answer: C

What physical property of all electrical equipment dictates the amount of cooling it will require?

A.    size of printed circuits boards
B.    weight ofeletronic components
C.    location of components inside equipment
D.    inefficiency of power and digital components

Answer: D

What is current?

A.    the flow of electrons through a conductor
B.    the potential difference between two points
C.    the capability of a conductor to store a charge
D.    the amount of voltage flowing through a conductor

Answer: A

What distinguishes precision cooling from comfort cooling with regard to airflow?

A.    Precision cooling has approximately 160 fm/kw vs 90 cfm/kw for comfort cooling
B.    Precision cooling has approximately 90 fm/kw vs 160 cfm/kw for comfort cooling
C.    Precision cooling must use a ducted airflow supply while comfort cooling must use a free airflow supply.
D.    Precision cooling must use a free airflow supply while comfort cooling must use a ducted airflow supply.

Answer: A

Which type air conditioning system generally has the lowest initial cost for the entire system?

A.    air cooled
B.    chilled water
C.    water cooled
D.    glycol cooled

Answer: A

What is “voltage”? (choose two)

A.    Electromotive Force (emf)
B.    The flow of electrons through a conductor
C.    The potential difference between two points
D.    The ability of a component to store a charge
E.    The energy given off as heat in an electric circuit

Answer: AC

What are two advantages of ceiling-mounted air conditioners?

A.    A raised floor is not necessary
B.    It does not take up any floor space
C.    It is easily maintained and serviced
D.    Condensation is above the dropped ceiling
E.    A contractor is not necessary for installation

Answer: AB

What is a 2N UPS system design?

A.    a dual-input single module UPS
B.    a parallel redundant UPS system consisting of two UPS modules
C.    two independent UPS system feeding dual-corded power supplies
D.    one single-module UPS feeding several dual-corded power suppies

Answer: C

QUESTION 10 has a 10-year-old computer room with a 30 cm raised-floor plenum. They have Just completed a change out of some IT equipment and also re-cabled much of the equipment with Cat5E and fiber. They are now having cooling problems in a few areas of the room. What are two likely cause?

A.    The new IT equipment draws air bottom to top, creating heat plumes around the racks
B.    When the new cabling was added, the old cable was not pulled from the raised-floor plenum, creating air dams.
C.    Some of the new IT equipment ismore dense and is generating more heat than the previous equipment at that location.
D.    The new fiber cable emits more heat than the previous copper network cabling, which causes an increase in the temperature of the air leaving the perforated tiles.

Answer: BC

Approximately how much cooling capacity does a 5-ton air conditioner have?

A.    12kw
B.    17kw
C.    20kw
D.    60kw

Answer: B

What is one advantage of using precision cooling rather than comfort cooling?

A.    No humidity control is required
B.    Reheat is available to increase humidity
C.    Temperature control is within +/-0.5 degree Celsius (+/-1 degreeFahrenhit.)
D.    Temperature control is within +/-0.3 degree Celsius (+/-5 degreeFahrenhit.)

Answer: C

If you want to pass APC PB0-200 successfully, donot missing to read latest lead2pass APC PB0-200 exam questions.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

Free Download Alcatel-Lucent 4A0-101 Practice Exams with PDF & VCE

Vendor: Alcatel-Lucent
Exam Code: 4A0-101
Exam Name: Alcatel-Lucent Interior Routing Protocols and High Availability

Click the exhibit button. In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming that there are no stub networks, which of the following statements regarding type 4 LSA generation is true?


A.    Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B.    Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C.    Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D.    Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4
LSA that is flooded to area 2.

Answer: D

» Read more

Latest Adobe 9A0-142 Practice Tests Free Download with PDF & VCE

Vendor: Adobe
Exam Code: 9A0-142
Exam Name: Adobe InDesign CS5 ACE Exam

You work as a Graphics Designer for KBC Inc. You are preparing a document for printing in InDesign CS5. Which of the following options in the Mark and Bleed pane of the Print dialog box specifies how far from the edge of the page will InDesign draw printer’s marks?

A.    Offset
B.    Crop Marks
C.    Weight
D.    Bleed Marks

Answer: A

» Read more

2014 Latest 100% Pass Guaranteed Adobe 9A0-079 Practice Tests

Vendor: Adobe
Exam Code: 9A0-079
Exam Name: Adobe RoboHelp 7 ACE Exam

Which command should you choose to show user defined variables as green text in the Design Editor?

A.    View > Show > Positioning
B.    View > Show > Tag List
C.    View > Show > Fields
D.    View > Show > Conditional Areas
E.    View > Show > Glyphs

Answer: C

» Read more

Latest 2014 Pass4sure and Lead2pass VMware VCPC510 Exam Questions

Vendor: Vmware
Exam Code: VCPC510
Exam Name: VMware Certified Professional – Cloud (VCP-Cloud) Exam

Which two actions must an administrator take before deleting a vApp network? (Choose two)

A.    Disconnect the vShield Edge device.
B.    Shut down all VMs within the vApp.
C.    Shut down all connected VMs.
D.    Disconnect all connected VMs.

Answer: CD

» Read more

Free Download Latest 2014 Pass4sure&Lead2pass Juniper JN0-694 Dumps

Vendor: Juniper
Exam Code: JN0-694
Exam Name: Juniper Networks Certified Support Professional (JNCSP-ENT)

Referring to the exhibit, why are the OSPF routes missing from the routing table for this router?
user@router> show ospf database
Type ID Adv Rtr Seq Age Opt Cksum Len
Router 0x800000d4 182 0x22 0x59f3 36
Router 0x800000d4 177 0x22 0x57f2 36
Router * 0x800000dc 176 0x22 0x75fa 72
Network 0x80000007 177 0x22 0x7957 36
Summary 0x80000004 2370 0x22 0x3f62 28
Summary 0x80000002 471 0x22 0xdeb9 28
Summary 0x800000cb 2037 0x22 0x2bbb 28
Summary 0x800000cc 487 0x22 0x19ca 28
Summary 0x80000003 140 0x22 0xb2f9 28
OSPF AS SCOPE link state database
Type ID Adv Rtr Seq Age Opt Cksum Len
Extern * 0x80000002 1037 0x22 0x4225 36
Extern * 0x80000001 2643 0x22 0xfc88 36
user@router> show ospf neighbor
Address Interface State ID Pri Dead ge-0/0/1.0 Full 128 36 ge-0/0/1.0 Full 128 30
user@router> show ospf interface ge-0/0/1.0 extensive
Interface State Area DR ID BDR ID Nbrs
ge-0/0/1.0 PtToPt 2
Type: P2MP, Address:, Mask:, MTU: 1500, Cost: 1
Adj count: 2
Hello: 10, DeaD. 40, ReXmit: 5, Not Stub
Auth type: None
Protection type: None
Topology default (ID 0) -> Cost: 1

A.    mismatching OSPF interface type with the neighbor
B.    MTU mismatch with the neighbor
C.    incorrect IP address configured on the interface
D.    no Type 4 LSAs in the OSPF database

Answer: A

» Read more

1 411 412 413 414 415 438