Free Download Microsoft 70-410 VCE Test Engine Full Version Now (221-230)

QUESTION 221
Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table.

image
You need to ensure that you can use Server Manager on DC1 to manage DC2. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)

A.    Install Microsoft .NET Framework 4 on DC2.
B.    Install Remote Server Administration Tools on DC1.
C.    Install Remote Server Administration Tools on DC2.
D.    Install Windows Management Framework 3.0 on DC2.

Answer: AD
Explanation:
Windows Management Framework 3.0 To use this release of Server Manager to access and manage remote servers that are running Windows Server 2008 or Windows Server 2008 R2, you must first install .NET Framework 4.0, and then install Windows Management Framework 3.0 on those servers. Note: In Windows Server 2012 R2, you can use Server Manager to perform management tasks on remote servers. Remote management is enabled by default on servers that are running Windows Server 2012 R2. To manage a server remotely by using Server Manager, you add the server to the Server Manager server pool. You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems (see above). Reference: Configure Remote Management in Server Manager

» Read more

Free Download Microsoft 70-410 VCE Test Engine Full Version Now (211-220)

QUESTION 211
You work as an administrator at L2P.com. The L2P.com network consists of a single domain named L2P.com.
Subsequent to deploying a Server Core Installation of Windows Server 2012 on a new L2P.com server, you are instructed to add a graphical user interface (GUI) to the server. You want to achieve this goal from the command prompt.
Which of the following actions should you take?

A.    You should consider making use of the dism.exe command.
B.    You should consider making use of the dsquery.exe command.
C.    You should consider making use of the dsadd.exe command.
D.    You should consider making use of the dsrm.exe command.

Answer: A
Explanation:
A. Deployment Image Servicing and Management (DISM)
B. dsquery Queries the directory by using search criteria that you specify C. dsadd Adds specific types of objects to the directory.
D. dsrm Deletes an object of a specific type or any general object from the directory.
The Deployment Image Servicing and Management (DISM) tool replaces the pkgmgr, PEImg, and IntlConfg tools that are being retired in Windows 7. DISM provides a single centralized tool for performing all of the functions of these three tools in a more efficient and standardized way, eliminating the source of many of the frustrations experienced by current users of these tools.
Dism /online /enable-feature /featurename:Server-Gui-Mgmt /featurename:Server-Gui-Shell / featurename:ServerCore-FullServer
http://msdn.microsoft.com/en-us/library/windows/desktop/dd371719%28v=vs.85%29.aspx

» Read more

Free Download Microsoft 70-410 VCE Test Engine Full Version Now (201-210)

QUESTION 201
In an isolated test environment, you deploy a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. The test environment does not have Active Directory Domain Services (AD DS) installed. You install the Active Directory Domain Services server role on Server1. You need to configure Server1 as a domain controller. Which cmdlet should you run?

A.    Install-ADDSDomainController
B.    Install-ADDSDomatn
C.    Install-ADDSForest
D.    Install-WindowsFeature

Answer: C
Explanation:
Install-ADDSDomainController – Installs a domain controller in Active Directory. Install-ADDSDomain – Installs a new Active Directory domain configuration. Install-ADDSForest – Installs a new Active Directory forest configuration. Install-WindowsFeature – Installs one or more Windows Server roles, role services, or features on either thelocal or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to andreplaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features.
C:\PS>Install-ADDSForest -DomainName corp.contoso.com -CreateDNSDelegation DomainMode Win2008 –
ForestMode Win 2008 R2 -DatabasePath “d:\NTDS” -SysvolPath “d:\SYSVOL” -LogPath
“e:\Logs”Installs
a new forest named corp.contoso.com, creates a DNS delegation in the contoso.com domain, setsdomain functional level to Windows Server 2008 R2 and sets forest functional level to Windows Server 2008,installs the Active Directory database and SYSVOL on the D:\ drive, installs the log files on the E:\ drive andhas the server automatically restart after AD DS installation is complete and prompts the user to provide andconfirm the Directory Services Restore Mode (DSRM) password. http://technet.microsoft.com/en-us/library/hh974720%28v=wps.620%29.aspx

» Read more

Free Download Microsoft 70-410 VCE Test Engine Full Version Now (191-200)

QUESTION 191
You have a new server named Server1 that runs Windows Server 2012 R2. Server1 has two dual-core processors and 32 GB of RAM. You install the Hyper-V server role on Server1. You create two virtual machines on Server1 that each have 8 GB of memory. You need to minimize the amount of time it takes for both virtual machines to access memory. What should you configure on each virtual machine?

A.    Resource control
B.    Dynamic Memory
C.    NUMA topology
D.    Memory weight

Answer: B
Explanation:
* Dynamic Memory is a new Hyper-V feature that helps you use physical memory more efficiently. With Dynamic Memory, Hyper-V treats memory as a shared resource that can be reallocated automatically among running virtual machines. Dynamic Memory adjusts the amount of memory available to a virtual machine, based on changes in memory demand and values that you specify. Dynamic Memory is available for Hyper-V in Windows Server 2008 R2 Service Pack 1 (SP1).
* Dynamic Memory helps you use memory resources more efficiently. Before this feature was introduced, changing the amount of memory available to a virtual machine could be done only when the virtual machine was turned off. With Dynamic Memory, Hyper-V can provide a virtual machine with more or less memory dynamically in response to changes in the amount of memory required by the workloads or applications running in the virtual machine. As a result, Hyper-V can distribute memory more efficiently among the running virtual machines configured with Dynamic Memory. Depending on factors such as workload, this efficiency can make it possible to run more virtual machines at the same time on one physical computer.
Reference: Hyper-V Dynamic Memory Configuration Guide

» Read more

Free Download Microsoft 70-410 VCE Test Engine Full Version Now (181-190)

QUESTION 181
Hotspot Question
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server2 has the Windows Deployment Services server role installed. On Server1, you have a virtual machine named VM1. You plan to deploy an image to VM1 by using Windows Deployment Services (WDS). You need to ensure that VM1 can connect to Server1 by using PXE. Which settings should you configure on VM1?
To answer, select the appropriate settings in the answer area.

image
Answer:

image
Explanation:
Virtual machines can be deployed to Hyper-V using Windows Deployment Services (WDS). To accomplish this requires the proper WDS infrastructure be in place and that the VM PXE boot using a Legacy Network Adapter. By default, there is only a “Standard Network Adapter” installed on the Virtual Machine, but for PXE functionality you will need to add a “Legacy Network Adapter”.
Go to the “Legacy Network Adapter” that you just added and specify that it should use the Virtual Switch that you just created.
Last but not least, you should change the BIOS boot priority to make sure that the Virtual Machine always tries to boot first using the “Legacy Network Adapter”. Just select the “Legacy Network Adapter” and move it to the top using the buttons.

image
Start your Virtual Machine and now PXE boot should work
http://www.danielclasson.com/guide-how-to-get-pxe-boot-to-work-in-hyper-v/ http://blogs.technet.com/b/askcore/archive/2008/11/25/installing-a-vm-operating-system-using-a-legacy-network-adapter-and-pxe-boot.aspx

» Read more

Free Download Microsoft 70-410 VCE Test Engine Full Version Now (161-170)

QUESTION 161
Your network contains an Active Directory domain named contoso.com. Your company hires 500
temporary employees for the summer. The human resources department gives you a Microsoft Excel document that contains a list of the temporary employees. You need to automate the creation of user accounts for the 500 temporary employees. Which tool should you use?

A.    The Add-Member cmdlet
B.    ADSI Edit
C.    The csvde.exe command
D.    Active Directory Users and Computers

Answer: C
Explanation:
Csvde.exe is the best option to add multiple users. as you just need to export the excel spreadsheet as a csvfile and make sure the parameters are correct.
You can use Csvde to import and export Active Directory data that uses the commaseparated valueformat. Use a spreadsheet program such as Microsoft Excel to open this .csv file and view the header andvalue information.

image
http://support.microsoft.com/kb/327620/en-us

» Read more

Free Download Microsoft 70-410 VCE Test Engine Full Version Now (151-160)

QUESTION 151
Your network contains an Active Directory domain named contoso.com. All client computer accounts are in an organizational unit (OU) named AllComputers. Client computers run either Windows 7 or Windows 8.
You create a Group Policy object (GPO) named GP1.
You link GP1 to the AllComputers OU.
You need to ensure that GP1 applies only to computers that have more than 8 GB of memory.
What should you configure?

A.    The Security settings of AllComputers
B.    The Security settings of GP1
C.    The WMI filter for GP1
D.    The Block Inheritance option for AllComputers

Answer: C
Explanation:
Windows Management Instrumentation (WMI) filters allow you to dynamically determine the scope of Group Policy objects (GPOs) based on attributes of the target computer. When a GPO that is linked to a WMI filter is applied on the target computer, the filter is evaluated on the target computer. If the WMI filter evaluates to false, the GPO is not applied (except if the client computer is running Windows Server, in which case the filter is ignored and the GPO is always applied). If the WMI filter evaluates to true, the GPO is applied. WMI filters, like GPOs, are stored on a per-domain basis. A WMI filter and the GPO it is linked to must be in the same domain.

image

image

SELECT TotalPhysicalMemory FROM Win32_ComputerSystem WHERE TotalPhysicalMemory >= 8000000000

» Read more

Free Download Microsoft 70-410 VCE Test Engine Full Version Now (141-150)

QUESTION 141
Drag and Drop Question
You plan to deploy a DHCP server that will support four subnets. The subnets will be configured as shown in the following table.

image
You need to identify which network ID you should use for each subnet. What should you identify? To answer, drag the appropriate network ID to the each subnet in the answer area.

image
Answer:

image
Explanation:

image

» Read more

1 2 3 4