[Full Version] NS0-158 Exam Questions Free Download From Lead2pass

2017 February NetApp Official New Released NS0-158 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

NetApp NS0-158 exam is very popular in NetApp field, many NetApp candidates choose this exam to add their credentials. There are many resource online to offering NetApp NS0-158 exam questions, through many good feedbacks, we conclude that Lead2pass can help you pass your test easily with NetApp NS0-158 exam questions. Choose Lead2pass to get your NetApp NS0-158 certification.

Following questions and answers are all new published by NetApp Official Exam Center: http://www.lead2pass.com/ns0-158.html

Which data protocol is available to use on an SVM?

A.    FTP
B.    CIFS
C.    HTTP
D.    TFTP

Answer: B
You can configure CIFS and NFS protocols on the Storage Virtual Machine (SVM) to provide file-level data access for NAS clients. To enable CIFS protocol, you must create the data LIFs and the CIFS server. To enable NFS protocol, you can specify the NIS details in addition to the data LIFs. https://library.netapp.com/ecmdocs/ECMP1354558/html/GUID-75523E3A-839A-4530-919D-29F98AB6C2E7.html

When creating a data aggregate, what is the default minimum number of disks for RAID4 and RAID-DP?

A.    5 for RAID4 and 9 for RAID-DP
B.    4 for RAID4 and 7 for RAID-DP
C.    3 for RAID4 and 5 for RAID-DP
D.    2 for RAID4 and 3 for RAID-DP

Answer: C
For 8.2, the minimum number of disks for RAID-DP is 5 and for RAID4 is 3.

What are the two valid settings for fractional reserve? (Choose two.)

A.    100%
B.    20%
C.    0%
D.    50%

Answer: AC
The fractional reserve setting is expressed as a percentage; the only valid values are 0 and 100 percent. You use the vol options command to set fractional reserve. https://library.netapp.com/ecmdocs/ECMP1368845/html/GUID-596042AF-8E9C-4187-969C-633DFDD5A936.html

How many disks reside in a DS4246 shelf?

A.    46
B.    42
C.    14
D.    24

Answer: D
http://www.netapp.com/uk/products/storage-systems/disk-shelves-and-storage-media/disk-shelves-tech-specs.aspx(See the Table).

Which two NFS versions are supported on clustered Data ONTAP 8.3? (Choose two.)

A.    NFSv1
B.    NFSv2
C.    NFSv3
D.    NFSv4

Answer: CD
Configure clustered Data ONTAP 8.3 for NFSv3, NFSv4, and NFSv4.1, including parallel NFS (pNFS)

A customer wants to use a UTA2 PCIe card in a new FAS8000 system. Which three steps must be completed before the customer is able to use the ports for Fc access to an FCP switch? (Choose three.)

A.    Use the system hardware unified-connect modify command to change the personality from initiator to target.
B.    Verify the WWPN of the UTA2 so that these can be used in the igroup to map the LUNs for host access.
C.    Verify that the correct SFP+ is installed for FC.
D.    Verify the card’s hardware configuration by running the systemhardware unified-connect show command.
E.    Verify that Data ONTAP iSCSI, GIFS, and NFS are licensed on the system.

Answer: ACD

Which two default SVM roles are available when an SVM is created? (Choose two.)

A.    vsadmin-readonly
B.    root
C.    vsadmin
D.    admin

Answer: AC
https://library.netapp.com/ecmdocs/ECMP1368701/html/GUID-FFE11F8C-490B-4D6D-A18E-3488275029C7.html(See the table 1st point and last point).

In the storage failover command, what does the bypass-optimization option do?

A.    It takes over the partner node without performing aggregate relocation.
B.    It migrates all logical interfaces during takeover.
C.    It takes over without migrating all logical interfaces.
D.    It takes over the partner node performing aggregate relocation.

Answer: A
Take over the partner node without performing storage failover takeover -bypass-aggregate relocation optimization true

Which type of upgrade is supported from a single-node FAS2552 to a dual-node cluster with clustered Data ONTAP 8.3 when all 10 GB ports are used for host access?

A.    a disruptive upgrade from a single-node cluster to a dual-node HA cluster
B.    a non-disruptive upgrade of a single-node cluster into a dual-node HA cluster
C.    a single-node cluster upgraded by migration of data to another single-node cluster
D.    a disruptive single-node cluster upgraded to a dual-node HA cluster by adding 10 Gb Ethernet cards

Answer: A
There are no Slots in FAS2552.
In Hardware universe there are no supported Adapter Cards for FAS25xx.
FAS 2552 uses 1 Gb ports for cluster interconnect as in Question 52 described.

Which two solutions are valid for clustered Data ONTAP MetroCluster? (Choose two.)

A.    FAS3200 series controllers
B.    FAS2500 series controller
C.    four nodes at each site
D.    two nodes at each site

Answer: AD
FAS 2500 series is not supported for Metro Cluster configuration

Which type of connectivity is supported when connecting third-party arrays through FlexArray Virtualization for back-end storage to a NetApp cluster?

A.    iSCSI
B.    SAS
C.    FC
D.    Infiniband

Answer: C
On the back end, FlexArray attaches to your existing storage arrays via Fibre Channel and provides a virtualization layer between the storage array and the hosts

A customer has an aggregate, aggr1_01 with three RAID groups: rg0, rg1, and rg2. Each RAID group has 15 disks, and the aggregate’s maximum RAID group size is set to 18 disks.
The customer adds three additional disks to the aggregate using the following command:

storage aggregate add-disks -aggregate aggr1_01 -diskcount 3

How are the RAID groups affected by this command?

A.    The disks are added to a new RAID group rg3.
B.    Each RAID group receives one additional disk.
C.    The three disks are added to RAID group rg2.
D.    The three disks are added to RAID group rg0.

Answer: C
Tested with a 4 node clustered Data ONTAP 8.3 cluster
Cluster::*> storage  aggregate  add-disks -aggregate aggr2 -diskcount 3
Cluster::*> run -node node03 sysconfig -V
volume aggr2 (3 RAID groups):
        group 2: 18 disks
        group 1: 15 disks
        group 0: 15 disks

Which three disk shelf types are supported in clustered Data ONTAP 8.3? (Choose three.)

A.    DS4486
B.    DS14-MK4-FC
C.    DS14-MK2-FC
D.    DS14-MK2-AT
E.    DS14

Answer: ABD
Disk shelves supported DS2246 (2U; 24 drives, 2.5″ SFF) DS4246 (4U; 24 drives, 3.5″ LFF)
DS4486 (4U; 48 drives, 3.5″ LFF)
DS4243 (4U; 24 drives, 3.5″ LFF) supported for upgrades only DS14 disk shelves (mk2-AT, mk4) are supported for upgrades only

NetApp NS0-158 exam questions are available in PDF and VCE format. This makes it very convenient for you to follow the course and study the exam whenever and wherever you want. The NetApp NS0-158 exam questions follow the exact paper pattern and question type of the actual NS0-158 certification exam, it lets you recreate the exact exam scenario, so you are armed with the correct information for the NS0-158 certification exam.

NS0-158 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDSXp6a2t3Z0JtbW8

2017 NetApp NS0-158 exam dumps (All 421 Q&As) from Lead2pass:

http://www.lead2pass.com/ns0-158.html [100% Exam Pass Guaranteed]


Why Choose Lead2pass?

If you want to pass the exam successfully in first attempt you have to choose the best IT study material provider, in my opinion, Lead2pass is one of the best way to prepare for the exam.

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back