This page was exported from Easily Pass By Training Lead2pass Latest Dumps [ https://www.freebraindump.com ]
Export date: Mon Mar 25 0:42:53 2024 / +0000 GMT

Latest Update Free Version of Microsoft 70-680 Exam Dumps in Lead2pass (51-60)



Lead2pass is providing complete solutions for Microsoft 70-680 that will help the candidates learn extensively and score exceptional in the Microsoft 's  70-680 exam. Passing the Microsoft is not a dream anymore as our user friendly learning resources ensure guaranteed success.

QUESTION 51
You have a computer that runs Windows 7. The computer contains one hard disk. The hard disk is configured as shown in the following table:

wpsD03D.tmp[4]_thumb[3]

You install a new 250-GB hard disk in the computer.
You need to ensure that all the files on the computer are available if a single disk fails.
What should you do?

A.    Create a mount point on C and D and then create a striped volume.
B.    Create a mount point on C and D and then create two striped volumes.
C.    Convert both disks to dynamic disks and then create a mirrored volume.
D.    Convert both disks to dynamic disks and then create two mirrored volumes.

Answer: D
QUESTION 52
You have two portable computers that run Windows 7. The computers are not connected to a network. The computers are configured as shown in the following table:

wps788D.tmp_thumb

You need to transfer a 1 GB file from Computer1 to Computer2.
What should you do first?

A.    On Computer1, create a wireless ad hoc network.
B.    On Computer2, configure the Bluetooth File Transfer Wizard to send files.
C.    On Computer2, create a network profile to connect to a network named Homegroup.
D.    On Computer1, configure the computer to be a member of a workgroup named Homegroup.

Answer: A
Explanation:
Wireless Ad Hoc network
You can set up a temporary wireless network, or ad hoc network, between two or more computers running Windows 7 (or between computers running Windows 7 and Windows Vista) provided they are all within 30 feet (9 meters) of each other. A WAP is not required to set up an ad hoc network. This enables users to share folders and other resources without needing to connect to an organizational network. On the first computer on the network, you open Network And Sharing Center and click Set Up A New Connection Or Network. You then choose the option Set Up A Wireless Ad Hoc (Computer To Computer) Network. You give the network a name and (if you want) set up a security key so that users joining the network need to supply a password. For WEP, this can be 5 case-sensitive characters, 13 case-sensitive characters, 10 hexadecimal caseinsensitive characters, or 26 hexadecimal case-insensitive characters, depending on security considerations. (If you choose WPA-2 Personal, you can insist on a 64-character password, but by the time everyone has typed it in correctly, the meeting would probably be over.)BluetoothWindows supports Bluetooth version 1.1 and later versions. Windows does not support Bluetooth version 1.0 because that specification lacks several critical updates that Windows requires to support Bluetooth wireless technology well.

QUESTION 53
You have a computer that runs Windows Vista. The hard disk is configured as shown in the exhibit. (Click the Exhibit button.)
You need to install Windows 7 in a dual-boot configuration. What should you do?

wpsB3BA.tmp_thumb

A.    From Windows Vista, extend Disk 0 Partition 1. Install Windows 7 in Disk 0 Partition 1.
B.    From Windows Vista, create a new partition. Install Windows 7 in Disk 0 Partition 1.
C.    Start the computer from the Windows 7 installation media. Install Windows 7 in Disk 0 Partition 1.
D.    Start the computer from the Windows 7 installation media. Install Windows 7 in the unallocated space on Disk 0.

Answer: D
Explanation:
The key to configuring dual-booting is ensuring that each operating system has its own partition or hard disk drive.
To dual-boot with Windows 7, you need to be able to create a new volume of at least 15 GB.
Even if you have more free space available on the volume you want to shrink, you may not be able to create a volume of the appropriate size because Windows Vista may not be able to move some special types of data to a different place on the hard disk drive.
When configuring a new computer to boot between multiple operating systems, it is also necessary to install operating systems in the order that they were released. For example, if you want to boot between Windows XP and Windows 7 on a new computer, you need to install Windows XP before you install Windows 7. If you install Windows XP after Windows
7, the Windows XP installation routine cannot recognize the Windows 7 operating system installation, and the computer only boots into Windows XP. It is possible to repair the computer from this point using Windows 7 startup repair so that it dual-boots, but the simplest course of action is just to install the operating systems in the order in which they were released by Microsoft.

QUESTION 54
You have a computer that runs Windows 7. The computer is in a workgroup.
You need to ensure that you can decrypt Encrypting File System (EFS) files on the computer if you forget your password.
What are two possible ways to achieve this goal?
(Each correct answer presents a complete solution. Choose two.)

A.    From Credential Manager, select Back up vault.
B.    From User Accounts, select Create a password reset disk.
C.    From User Accounts, select Manage your file encryption certificates.
D.    From Authorization Manager, modify the Authorization Manager options.

Answer: BC

QUESTION 55
You have a computer that runs Windows 7.
You generate a System Diagnostic Report and receive the following warning message:
"The Graphics rating for the system is poor and may be the cause of performance problems."
You need to increase the graphics performance of the computer without modifying the current hardware or drivers.
What should you do?

A.    From Personalization, modify the screen saver.
B.    From Indexing Options, modify the Advanced options.
C.    From Performance Options, modify the visual effects.
D.    From Performance Options, modify the processor scheduling.

Answer: C

QUESTION 56
You have two computers named Computer1 and Computer2. Computer1 runs Windows Vista. Computer2 runs Windows 7.
You plan to use User State Migration Tool (USMT) 4.0 to migrate user profiles and data from Computer1 to Computer2.
You need to prevent some system settings from being migrated.
You must achieve this goal by using the minimum amount of administrative effort.
Which file should you modify?

A.    config.xml
B.    migapp.xml
C.    migdocs.xml
D.    miguser.xml

Answer: A

QUESTION 57
You have a computer that runs Windows 7.
You install a second internal hard disk drive in the computer.
You attempt to create a system image and discover that the new disk is not listed as a backup destination.
You need to ensure that you can use the new disk as a backup destination for system images. What should you do?

A.    Create a NTFS partition.
B.    Create a mirrored volume.
C.    Create a system repair disc.
D.    Log on to the computer by using a different account.

Answer: A
Explanation:
If the drive you are saving your backup on is formatted using the NTFS file system and has enough disk space, a System Image of your programs, your operating system, and all drivers and registry settings is also included in the backup.An external hard drive: (Note that the question actually asks about internal) You cannot use an external hard drive for a System Image backup unless you convert its filing system to NTFS. By default external hard drives are formatted using FAT.NOT Accout:The backup account requires administrative privileges to the computer being backed up, but it implys that this was not the issue, since it got to the point were it could see that this disk wasNOT System repair disc:A system repair disc can be used to boot your computer. It also contains Windows system recovery tools that can help you recover Windows from a serious error or restore your computer from a system image. It is not a system image itself.

QUESTION 58
A standard user named User1 has a computer that runs Windows 7.
You need to ensure that User1 can run Windows Easy Transfer.
What should you do?

A.    Disable User Account Control (UAC).
B.    Add User1 to the Administrators group.
C.    Configure User1 to have a complex password.
D.    Copy the support folder from the Windows 7 installation media to the local hard disk drive.

Answer: B

QUESTION 59
You have a computer named Computer1 that runs Windows 7.
You plan to migrate the user state on Computer1 by using User State Migration Tool (USMT) 4.0.
You need to identify which user documents will be included in the migration.
What should you do?

A.    Run Usmtutils.exe and use the /ec option.
B.    Run Sysprep.exe and use the /audit option.
C.    Run Loadstate.exe and use the /v:12 option.
D.    Run Scanstate.exe and use the /genmigxml option.

Answer: D
Explanation:
ScanState
You run ScanState on the source computer during the migration. You must run ScanState.exe on computers running Windows Vista and Windows 7 from an administrative command prompt. When running ScanState on a source computer that has Windows XP installed, you need to run it as a user that is a member of the local administrators group. The following command creates an encrypted store named Mystore on the file share named Migration on the file server named Fileserver that uses the encryption key Mykey: scanstate \fileservermigrationmystore /i:migapp.xml /i:miguser.xml /o /config:config.xml /encrypt /key:"mykey"
/genmigxml: path to a file This option specifies that the ScanState command should use the document finder to create and export an .xml file that defines how to migrate all of the files on the computer on which the ScanState command is running.

QUESTION 60
You are the administrator of a computer named Computer1 that runs Windows 7. Several users share Computer1. The users plan to encrypt files on the computer.
You need to ensure that you can access all encrypted files on the computer.
What should you do first?

A.    At a command prompt, run Cipher.exe.
B.    At a command prompt, run Certutil.exe.
C.    From the local comput er policy, modify the User Rights Assignment.
D.    From User Accounts, run the Manage your file encryption certificates wizard.

Answer: A

Lead2pass Microsoft 70-680 study guide is prepared by the expert professionals in the IT industry who help you prepare for all the leading IT vendor exams. We do thorough research and analyze the current trends and requirement to provide relevant and regularly updated preparation material for you. Lead2pass's 70-680 exam study material will help in preparing for the expected questions and let you answer the questions in the most accurate manner in your 70-680 certification exams.

http://www.lead2pass.com/70-680.html

 

 


Post date: 2014-12-05 02:21:00
Post date GMT: 2014-12-05 02:21:00
Post modified date: 2014-12-05 02:21:00
Post modified date GMT: 2014-12-05 02:21:00

Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team www.gVectors.com