This page was exported from Easily Pass By Training Lead2pass Latest Dumps [ https://www.freebraindump.com ]

Export date:Tue Apr 16 19:00:09 2024 / +0000 GMT

___________________________________________________


Title: [Lead2pass New] Lead2pass 300-175 Exam Questions Guarantee 300-175 Certification Exam 100% Success (41-60)

---------------------------------------------------


Lead2pass 2017 August New Cisco 300-175 Exam Dumps!  100% Free Download! 100% Pass Guaranteed!  Good news, Lead2pass has updated the 300-175 exam dumps. With all the questions and answers in your hands, you will pass the Cisco 300-175 exam easily.  Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/300-175.html  QUESTION 41Drag and Drop QuestionThis question concerns the installation of a Cisco Unified Computing System blade server AC power supply. Drag the options on the left to the right side in the correct order when performing the installation. Note: Not all of the steps on the left will be used.&nbsp; Answer:  &nbsp; QUESTION 42Drag and Drop QuestionDrag the characteristic on the left to the most appropriate Cisco unified Computing System 62XX Fibre Channel switching mode on the right. &nbsp; Answer:  &nbsp; 300-175 QUESTION 43Drag and Drop QuestionDrag the upgradeable type of firmware on the left to the appropriate Cisco UCS component on the right. &nbsp; Answer:  &nbsp; QUESTION 44Which ports can access the Cisco IMC if you select Shared LOM NIC mode in the Cisco IMC Configuration Utility for a Cisco UCS C-Series server? A.&nbsp;&nbsp;&nbsp; the ports on an installed Cisco network adapter cardB.&nbsp;&nbsp;&nbsp; the two 1-Gb Ethernet portsC.&nbsp;&nbsp;&nbsp; the two 10/100 management portsD.&nbsp;&nbsp;&nbsp; the two 10/100 management ports, but each port has a default setting Answer: B QUESTION 45Which NIC redundancy modes allow the LOMs to be discovered by the operating system or hypervisor? A.&nbsp;&nbsp;&nbsp; Dedicated modeB.&nbsp;&nbsp;&nbsp; Active/ActiveC.&nbsp;&nbsp;&nbsp; Active/StandbyD.&nbsp;&nbsp;&nbsp; Cisco Card Mode Answer: A QUESTION 46Which two are true with respect to the unified ports on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.) A.&nbsp;&nbsp;&nbsp; The port mode is automatically discovered after plugging in a LAN or Fibre Channel-attached cable.B.&nbsp;&nbsp;&nbsp; By default, unified ports that are changed to Ethernet port mode are set to uplink Ethernet port type.C.&nbsp;&nbsp;&nbsp; Ethernet ports must be grouped together in a block and must start with the first port and end with an odd numbered port.D.&nbsp;&nbsp;&nbsp; Alternating Ethernet and Fibre Channel ports is supported on the expansion module.E.&nbsp;&nbsp;&nbsp; After making port mode changes on an expansion module, the module will reboot.F.&nbsp;&nbsp;&nbsp; In a standalone configuration, making port mode changes to the fixed module will not cause the fabric interconnect to reboot. Answer: CE QUESTION 47Which two are true with respect to the switching modes on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.) A.&nbsp;&nbsp;&nbsp; End-host mode presents a link to a northbound uplink switch as a host trunk with loop detection that is provided by STP.B.&nbsp;&nbsp;&nbsp; For northbound traffic, server MAC addresses are statically pinned to an uplink; the return path is controlled by the unified fabric switches.C.&nbsp;&nbsp;&nbsp; A fabric interconnect port in Ethernet switching mode appears to the uplink switch as a host with many MAC addresses.D.&nbsp;&nbsp;&nbsp; Server-to-server traffic on a common VLAN are locally switched by the fabric interconnect and not the northbound switches.E.&nbsp;&nbsp;&nbsp; A MAC forwarding table is not used to forward traffic to the uplink switch.F.&nbsp;&nbsp;&nbsp; A MAC address forwarding table is maintained for server-to-server communications across VLANs. Answer: DE QUESTION 48What is true statement concerning port personalities on the Cisco Unified Computing System 62XX Fabric Interconnect? A.&nbsp;&nbsp;&nbsp; Fibre Channel uplink ports must operate in Fibre Channel switching mode.B.&nbsp;&nbsp;&nbsp; The fabric interconnects use native FCoE storage ports to directly attach to the SAN infrastructure.C.&nbsp;&nbsp;&nbsp; By default, all Fibre Channel ports are unconfigured.D.&nbsp;&nbsp;&nbsp; The Fibre Channel uplink ports do not support VSAN trunking and Fibre Channel port channels.E.&nbsp;&nbsp;&nbsp; The Fibre Channel storage ports support VSAN trunking and Fibre Channel port channels. Answer: C QUESTION 49What is a true statement concerning automatic Fibre Channel pinning on a Cisco Unified Computing System 62XX Fabric Interconnect? A.&nbsp;&nbsp;&nbsp; By default, uplink Fibre Channel interfaces are configured for VSAN trunking.B.&nbsp;&nbsp;&nbsp; Using NPV, each downstream server will be pinned to an uplink port that is based on a PIN group.C.&nbsp;&nbsp;&nbsp; The Fibre Channel pinning process is implemented differently than end-host MAC address pinning.D.&nbsp;&nbsp;&nbsp; With VSAN trunking, the automatic pinning of server traffic to Fibre Channel uplink ports will be based on the server WWN. Answer: D QUESTION 50The Cisco UCS administrator has the chassis discovery policy set to "2-link". The administrator connects a new chassis to the Cisco UCS 6200 Series Fabric Interconnects using four links. Which option about link utilization is true? A.&nbsp;&nbsp;&nbsp; The Cisco UCS will use two links until the chassis is reacknowledged, after which it will use all four links.B.&nbsp;&nbsp;&nbsp; The Cisco UCS will use all four links for discovery.C.&nbsp;&nbsp;&nbsp; The Cisco UCS will use only two links. The other two links are unusable.D.&nbsp;&nbsp;&nbsp; The Cisco UCS will use only two links. However, the administrator can manually pin traffic to the extra links by using service profiles. Answer: A QUESTION 51Which policy is used to update adapter firmware? A.&nbsp;&nbsp;&nbsp; adapter policyB.&nbsp;&nbsp;&nbsp; host firmware policyC.&nbsp;&nbsp;&nbsp; management firmware policyD.&nbsp;&nbsp;&nbsp; network control policy Answer: B QUESTION 52Which options are valid port types when configuring fixed 10-Gb LAN interfaces on the Cisco UCS 6200 Series Fabric Interconnects? (Choose three.) A.&nbsp;&nbsp;&nbsp; monitoring portB.&nbsp;&nbsp;&nbsp; server portC.&nbsp;&nbsp;&nbsp; uplink Ethernet portD.&nbsp;&nbsp;&nbsp; FEX portE.&nbsp;&nbsp;&nbsp; Fibre Channel storage port Answer: ABC QUESTION 53When cabling a Cisco UCS 6200 Series Fabric Interconnect to disjoint Layer 2 networks, which option must be considered? A.&nbsp;&nbsp;&nbsp; The fabric interconnect must be in switching mode.B.&nbsp;&nbsp;&nbsp; You must first configure a LAN pin group.C.&nbsp;&nbsp;&nbsp; Each VLAN is allowed across multiple disjoint uplinks.D.&nbsp;&nbsp;&nbsp; Each vNIC can communicate to a single disjoint network. Answer: D QUESTION 54Which two items represent the features of Call Home on the Cisco Unified Computing System? (Choose two.) A.&nbsp;&nbsp;&nbsp; syslogB.&nbsp;&nbsp;&nbsp; send fault details to Cisco TACC.&nbsp;&nbsp;&nbsp; SNMP trap receiverD.&nbsp;&nbsp;&nbsp; send email alerts to administratorsE.&nbsp;&nbsp;&nbsp; central repository of normalized fault data Answer: BD QUESTION 55Which three items represent message formats that are available to send fault data using Cisco Call Home? (Choose three.) A.&nbsp;&nbsp;&nbsp; short textB.&nbsp;&nbsp;&nbsp; long textC.&nbsp;&nbsp;&nbsp; HTMLD.&nbsp;&nbsp;&nbsp; SOAP APIE.&nbsp;&nbsp;&nbsp; XMLF.&nbsp;&nbsp;&nbsp; Java Answer: ABE QUESTION 56Which BIOS setting is required for a VMware ESXi 5.0 host to support Cisco VM-FEX universal pasthrough mode? A.&nbsp;&nbsp;&nbsp; VT for Directed IOB.&nbsp;&nbsp;&nbsp; ACPI 10 SupportC.&nbsp;&nbsp;&nbsp; VEMDPA AgentD.&nbsp;&nbsp;&nbsp; Execute Disabled BitE.&nbsp;&nbsp;&nbsp; Processor C State Answer: A QUESTION 57What are the three main components of the VM-FEX environment? (Choose three.) A.&nbsp;&nbsp;&nbsp; Red Hat Network Satellite serverB.&nbsp;&nbsp;&nbsp; ESX host with Cisco UCS M81KR VICC.&nbsp;&nbsp;&nbsp; ESX host with Cisco UCS M72KR CAND.&nbsp;&nbsp;&nbsp; VMware vCenterE.&nbsp;&nbsp;&nbsp; VMware Update ManagerF.&nbsp;&nbsp;&nbsp; Cisco UCS ManagerG.&nbsp;&nbsp;&nbsp; Cisco VSG Answer: BDF QUESTION 58Which two policies can be configured in a port profile for VM-FEX high-performance mode? (Choose two.) A.&nbsp;&nbsp;&nbsp; QoS policyB.&nbsp;&nbsp;&nbsp; network control policyC.&nbsp;&nbsp;&nbsp; adapter policyD.&nbsp;&nbsp;&nbsp; BIOS policyE.&nbsp;&nbsp;&nbsp; vNIC connection policy Answer: AC QUESTION 59Which three options are true regarding port profiles in Cisco UCS Manager? (Choose three.) A.&nbsp;&nbsp;&nbsp; Port profiles define operating-system kernel parameters.B.&nbsp;&nbsp;&nbsp; Port profiles are represented as a port group in vCenter.C.&nbsp;&nbsp;&nbsp; Port profiles can be used by more than one DVS.D.&nbsp;&nbsp;&nbsp; Port profile parameters are visible on vCenter.E.&nbsp;&nbsp;&nbsp; Port profile parameters can be modified from vCenter.F.&nbsp;&nbsp;&nbsp; Port profiles can be modified only from Cisco UCS Manager. Answer: BCF QUESTION 60Which two options are valid modes for VM-FEX in a Cisco UCS Manager port profile? (Choose two.) A.&nbsp;&nbsp;&nbsp; transparentB.&nbsp;&nbsp;&nbsp; bypassC.&nbsp;&nbsp;&nbsp; standardD.&nbsp;&nbsp;&nbsp; advancedE.&nbsp;&nbsp;&nbsp; high-performanceF.&nbsp;&nbsp;&nbsp; low-pass Answer: CE More free Lead2pass&nbsp;300-175 exam new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDVDYyRldqb1AzenM  Once there are some changes on 300-175 exam questions, we will update the study materials timely to make sure that our customer can download the latest edition. 2017 Cisco 300-175 (All 255 Q&amp;As) exam dumps (PDF&amp;VCE) from Lead2pass:  https://www.lead2pass.com/300-175.html [100% Exam Pass Guaranteed]

---------------------------------------------------


Images: 

---------------------------------------------------




---------------------------------------------------


Post date: 2017-08-29 10:07:22

Post date GMT: 2017-08-29 10:07:22

Post modified date: 2017-08-29 10:07:22

Post modified date GMT: 2017-08-29 10:07:22



____________________________________________________________________________________________


Export of Post and Page as text file has been powered by [ Universal Post Manager ] plugin from www.gconverters.com