[2018-3-27] Free Updated Lead2pass 300-080 Exam Dumps Download

Free Lead2pass Cisco 300-080 PDF Exam Questions And Answers Download.v.2018-3-27.277q:

https://www.lead2pass.com/200-355.html

QUESTION 249
Some of yours users report issues when they are dialing extensions located in other branch offices. Sometimes the calls are set up successfully, and sometimes users experience problems during call setup. Which two reasons for the issue are true? (Choose two)

A.    Not enough bandwidth is available between the two locations and Automated Alternate Routing is disabled on this cluster.
B.    The Partition that contains the called extensions is not assigned to the line or device CSS of the calling users.
C.    A firewall rule blocks traffic between the branch offices so the call setup cannot be completed.
D.    The called extension is used only on a device profile for extension mobility and the user has been authenticated to a second phone in a different branch so the calls are delivered randomly to only one of his phones.
E.    The remote branch experiences WAN link outages and there is no Forward Unregistered Internal number configured for the remote directory number.

» Read more

[2017 New] 100% Pass Lead2pass 300-080 New Questions Free Version (222-232)

2017 July Cisco Official New Released 300-080 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

As a professional IT exam study material provider, Lead2pass gives you more than just 300-080 exam questions and answers. We provide our customers with the most accurate study material about the 300-080 exam and the guarantee of pass. We assist you to prepare for 300-080 certification which is regarded valuable the IT sector.

Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/300-080.html

QUESTION 222
Cisco Telepresence Systems that are calling from a CUCM cluster to an H.323 registered device on a Cisco VCS Control do not work.
However, calls from the H.323 VCS registered devices to the same CUCM registered systems do work. What are two possible reasons?

A.    the call from CUCM to VCS Control does not match any search rule
B.    Calls from CUCM add “:5060” or “:5061” after the SIP address, unlike the VCS Control
C.    both systems do not support TLS encryption
D.    the SIP trunk has not enabled bidirectional mode
E.    Cisco VCS Control is registered in the wrong partition

» Read more

[Full Version] 2016 Cisco 300-080 Dumps Free Download 100% Pass Promised By Lead2pass (141-160)

2016 November Cisco Official New Released 300-080 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

I was recommended by one of my friend, he used the Lead2pass 300-080 dumps and said they are helpful. He was right! I passed my Cisco 300-080 exam yesterday. I was lucky, all my questions in the exams were from Lead2pass dumps.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-080.html

QUESTION 141
Refer to the exhibit, which displays the output of the debug ccsip messages command on a Cisco router.

» Read more

[Full Version] 2016 Cisco 300-080 Dumps Free Download 100% Pass Promised By Lead2pass (121-140)

2016 November Cisco Official New Released 300-080 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

This dump is valid to pass Cisco 300-080. And don’t just memorize the answer, you need to get through understanding of it because the question changed a little in the real exam. The material is to supplement your studies.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-080.html

QUESTION 121
Refer to the exhibit. Local 10-digit dialing in the North American Numbering Plan to area code 456 is failing. Which two changes are needed to enable 10-digit dialing? (Choose two.)

» Read more

[Full Version] 2016 Cisco 300-080 Dumps Free Download 100% Pass Promised By Lead2pass (101-120)

2016 November Cisco Official New Released 300-080 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Are you worrying about the 300-080 exam? Lead2pass provides the latest 300-080 braindumps and guarantees you passing 300-080 exam beyond any doubt.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-080.html

QUESTION 101
Which Cisco Unified Communications Manager tool verifies configured route patterns, calling search spaces, and route groups?

A.    Cisco Unified Reporting
B.    CiscoUnified Communications ManagerCDR Analysis and Reporting
C.    CiscoUnified Communications ManagerDialed Number Analyzer
D.    Cisco Unified Real-Time Monitoring Tool

» Read more

[Full Version] 2016 Cisco 300-080 Dumps Free Download 100% Pass Promised By Lead2pass (81-100)

2016 November Cisco Official New Released 300-080 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Amazing,100% candidates have passed the 300-080 exam by practising the preparation material of Lead2pass, because the braindumps are the latest and cover every aspect of 300-080 exam. Download the braindumps for an undeniable success in 300-080 exam.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-080.html

QUESTION 81
When identifying Cisco TelePresence Endpoint traffic characteristics, which three statements are true? (Choose three.)

A.    Latency, jitter, and loss are measured in a round-trip fashion.
B.    Latency, jitter, and loss are measured unidirectionally.
C.    Latency and loss are measured at a packet level, based on RTP header sequence numbers and time stamps.
D.    Latency and jitter are measured at a packet level, based on RTP header sequence numbers and time stamps.
E.    Jitter is measured at a video frame level, by measuring the arrival time of the video frame versus the expected arrival time.
F.    Jitter is measured at a packet level, by measuring the arrival time of the packet versus the expected arrival time.

» Read more

[Full Version] 2016 Cisco 300-080 Dumps Free Download 100% Pass Promised By Lead2pass (61-80)

2016 November Cisco Official New Released 300-080 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Lead2pass is one of the leading exam preparation material providers. Its updated 300-080 braindumps in PDF can ensure most candidates pass the exam without too much effort. If you are struggling for the 300-080 exam, it will be a wise choice that get help from Lead2pass.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-080.html

QUESTION 61
Refer to the exhibit. Users are reporting that inbound calls from the PSTN are dropping when not answered within 10 seconds. Calls come in via ISDN T1 PRI.
Which configuration change is needed to prevent the calls from dropping?

» Read more

[Full Version] 2016 Cisco 300-080 Dumps Free Download 100% Pass Promised By Lead2pass (41-60)

2016 November Cisco Official New Released 300-080 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

The Cisco 300-080 PDF, 300-080 VCE and 300-080 exam questions and answers at Lead2pass are written and prepared by Cisco affiliated trainers and lecturers with decades of experience in the IT field. This ensures that you are equipped with the latest and most current information to give you a better chance of passing the Cisco 300-080 exam.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-080.html

QUESTION 41
An IP phone that is connected through a Cisco Catalyst 3750 Series Switch is failing to register with the subscriber as a backup server. When the user presses the settings button on the phone, only the Cisco Unified Communications Manager publisher shows as registered. What is the most likely cause for this issue?

A.    The phone does not have the correct Cisco Unified Communications Manager group in the device configuration page.
B.    The Cisco Unified Communications Manager group that is applied through the device pool is misconfigured.
C.    The ip-helper address command for the subscriber is not configured on the switch port.
D.    The subscriber does not have the correct device pool configured.
E.    The enterprise phone configuration does not have the call control redundancy enabled.

» Read more

1 2